5V供电低价120MHz恒温晶振

频率：120.000MHz

供电电压: 5V

Parameter			Min	Typ.	Max	Unit	Condition	Note
Frequency Stability
Frequency				120.000		MHz
Initial Frequency Accuracy			-100		+100	ppb	Vc=2.0V/@25℃,after 30mins power on ref to nominal frequency
Supply Variation			-10		+10	ppb	Vs±5%，@25℃
Load Variation			-10		+10	ppb	CL±5%，@25℃
Aging		per    day	-5.0		+5.0	ppb	Aging after 30 days of operation
		first   year	-500		+500	ppb
Temperature Stability			-100		+100	ppb	-20℃～+70℃ ref to25℃
Short Term Stability ( in still air)					0.05	ppb/s	after power on 1hour,@25℃
G-sensitivity					1	ppb
Supply Voltage/Current
Voltage Supply			4.75	5	5.25	V
Operating     Current					600	mA	during warm up
					220	mA	at steady state,@25℃
Output Characteristics
Sine-Wave	Load			50		Ω
	Level		4		7	dBm
	Harmonic				-30	dBc
Spurious					-95	dBc
Phase Noise
Phase Noise					-95	dBc/Hz	@10Hz
					-125		@100Hz
					-150		@1KHz
					-165		@10KHz
					-170		@100KHz

 

Voltage Control Characteristics
Control Voltage Range	0	2.0	4.0	V
Frequency tuning range			-1.5	ppm	Vc=0V
	-100		+100	ppb	Vc=2.0V
	+1.5			ppm	Vc=4.0V
Slope	Positive
Linearity	-10		+10	%
Input Impedance	100			KΩ
Mechanical specification & Package
Package Size	Refer to the below drawing
Pin Connector Size
Pin Connector Definition
RoHS	RoHS compliant

Environmental, Mechanical Conditions
Operating temperature range	-20℃~+70℃
Storage temperature range	-55℃~+105℃
ESD	HBM.2KV
MSL	MSL1
Drop Test	The test shall be carried out as the provisions of the IEC60028-2-32 test Ed. 10cm height, 3 times on hard board with thickness of 3cm
Bumping Test	Device are bumped to three mutually perpendicular axes at peak acceleration of 400m/s², each 4000±10 times , 6ms pulse duration time.
Vibration test	Frequency range:1Hz-4Hz-100Hz-200Hz Accelaration:0.0001g²/Hz-0.01g²/Hz-0.01g²/Hz-0.001g²/Hz Grms=1.15g Sweep time:30 minutes (perpendicular axes each sweep time)
Mechanical Shock	100g, 6mS duration, 1/2 sine wave, 3 shocks each direction along 3 mutually perpendicular planes.
Thermal shock	0.5h@-40℃，0.5h@+85℃，Note: the changing time < 30 seconds, cycling for 100 times

 Dimensions :

	Dimension (mm)
Symbol	Min	Max
A		20.6
B	14.74	15.74
C		10.5
D	0.4	0.6
E	4.0	5.0
F	0.5	0.7
G	7.52	7.72
H	10.1 nominal
I	10.1 nominal

 

Pin Function：